Cleanup and recovery process after flooding

0
261

Due to recent flooding in coastal Maryland and because floods are the nation’s number one natural disaster, it is important to know the facts about the cleanup and recovery process, which begins with flood insurance.

If you have any questions or would like to speak with a FEMA representative, please call FEMA Region III Public Information Officer Niki Edwards at (215) 931-5614 or the main FEMA News Desk at (202) 646-4600. For a more detailed fact sheet on how local residents can file their flood insurance claim, please simply reply to this email.

Thank you,

FloodSmart

BEWARE OF HAZARDS

First, check for damage. Check for structural damage before re-entering your home. Contact professionals immediately if you suspect damage to water, gas, electric or sewer lines.

Throw away food that has come in contact with floodwaters.

Boil water until authorities declare the water supply safe to drink.

FILE YOUR FLOOD INSURANCE CLAIM

· Call your insurance agent who handles your flood insurance to file a claim. Have the following information with you when you place your call: (1) the name of your insurance company (your agent may write policies for more than one company); (2) your policy number; and (3) a telephone number/e-mail address where you can be reached.

· Take photos of any water in the house and damaged personal property. If necessary, place these items outside the home. Your adjuster will need evidence of the damage and damaged items (e.g., cut swatches from carpeting) to prepare your repair estimate.

· List damaged or lost items and include their age and value where possible. If possible, supply receipts for those lost items to the adjuster. Officials may require disposal of damaged items. If so, try to keep a swatch or other sample of the items for the adjuster.

CLEAN UP

· Remove wet contents immediately to prevent mold. Wet carpeting, furniture, bedding and other items holding moisture can develop mold within 24 to 48 hours. During the first 48 hours, you can help control mold growth by cleaning with a phenolic or pine-oil cleaner (non-ammonia detergent, soap or commercial cleaner) and disinfecting with a 10 percent bleach solution (1-1/2 cups of bleach in a gallon of water). Then dry and monitor for several days. If any mold develops, throw the item away.

· Thoroughly dry out the building’s interior. Portable dehumidifiers are useful, and rental costs may be covered under your flood policy. An air conditioner can also be used to start the drying-out process.

· Help damaged walls dry out. If the walls are damaged, take photographs of the baseboard. Then remove the baseboard. Knock small holes at floor level in the drywall, between the wall studs. This will let moisture trapped behind the drywall seep out.

· Have your furnace checked for damage. Your water heater may work, but if the floodwater covered part of, or the entire tank, the insulation between the walls may be damaged. Obtain an estimate to replace the damaged furnace and water heater.

FOR MORE INFORMATION

· Contact your local building inspections or planning office or county clerk’s office to get more information on local building requirements before repairing your structure. If you can’t find a local contact, call your state NFIP coordinator. Contact information can be found at www.floods.org/statepocs/stcoor.asp.